Skip to main content

GetResponse

With the GetResponse modules in Make, you can:

  • watch, list, retrieve, create, send, cancel and delete the newsletters

  • watch, list, retrieve, create, update and delete the contacts

  • watch, list, retrieve, create, and update the campaigns

  • list, retrieve, create, update and delete the tags

To get started with GetResponse, create an account at GetResponse.com.

Connect GetResponse to Make

To connect the GetResponse app with the Make:

  1. Log in to your Make account, and add a module from the GetResponse app into a Make scenario.

  2. Click Add next to the Connection field.

    GetResponse_1.gif

  3. In the Connection name field, enter a name for the connection and click Save.

  4. If you did not log in earlier, enter your GetResponse credentials and click Log in.

    GetResponse_2.png

  5. Confirm the access by clicking Yes.

    GetResponse_3.png

You have successfully connected the GetResponse app with Make and can now build scenarios.

Newsletters

You can watch, list, retrieve, create, send, cancel and delete the newsletters using the following modules.

Watch Newsletters

Triggers when a new newsletter has been created.

Connection

Establish a connection to your GetResponse account.

Limit

Set the maximum number of newsletters Make will return during one execution cycle. The default value is 2.

List Newsletters

Lists all newsletters or searches for them by specified criteria.

Connection

Establish a connection to your GetResponse account.

Type

Select the type of the newsletter:

  • Draft

  • Broadcast

  • Splittest

  • Automation

Subject

Enter (map) a subject to search newsletters by subject.

Name

Enter (map) a newsletter name to search newsletters by name.

Status

Select the status:

  • Enabled

  • Disabled

Created on (from)

Enter (map) a date to search newsletters created on or after the specified date. See the list of supported date and time formats.

Created on (to)

Enter (map) a date to search newsletters created on or before the specified date. See the list of supported date and time formats.

Campaign ID

Select or map a Campaign ID whose newsletters you want to list.

Sort by Creation Date

Select the order of sorting:

  • Ascending

  • Descending

Limit

Set the maximum number of newsletters Make will return during one execution cycle. The default value is 10.

Get a Newsletter

Returns a specified newsletter.

Connection

Establish a connection to your GetResponse account.

Newsletter ID

Select or map a Newsletter ID whose details you want to retrieve.

Create a Newsletter

Create a new newsletter and puts it in a queue to send.

Connection

Establish a connection to your GetResponse account.

Content

Enter (map) the content for the newsletter.

HTML

Enter (map) the message content in HTML format.

Plain

Enter (map) the newsletter text plain text format.

Subject

Enter (map) the subject line for the newsletter.

From Field

Enter (map) the email address from which you will send the newsletter.

Campaign

Select or map a Campaign ID to which you want to assign the newsletter.

Note

The newsletter must be assigned to a campaign.

Send on

Enter (map) the scheduled send date and time for the newsletter in the ISO 8601 format. See the list of supported date and time formats.

Note

To send your message immediately, omit the sendon section.

Attachments

Enter (map) the attachment details. The size of all attachments combined should not exceed 400KB.

File

Enter (map) the file details:

File Name

Enter (map) the file name.

Content

Enter (map) the content in base64 encoded.

Mime Type

Enter (map) the file MIME media type.

Send Settings

Select or map the send settings:

Note

Select the method to deliver the message to the subscriber. You can specify multiple parameters, the system uses AND logic.

Selected Campaigns

Select or map the campaigns to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments  or selectedContacts is required.

Selected Segments

Select or map the segments to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments  or selectedContacts is required.

Selected Contacts

Select or map the contacts to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments  or selectedContacts is required.

Selected Suppressions

Select or map the list of selected suppressions. Note that suppressions exclude contacts.

Excluded Campaigns

Select or map the campaigns to exclude from the newsletter.

Excluded Segments

Select or map the segments to exclude from the newsletter.

Time Travel

Select whether to use the time travel functionality.

Note

The system will match the scheduled sending hour for the message to the time zone of each recipient. As a result, sending may take up to 24 hours.

Perfect Timing

Select whether to use the perfect timing functionality.

External Lexpad

Enter (map) the external lexpad details:

Data Source URL

Enter ( map) a URL to the endpoint that will provide data for External Lexpad.

Data Source Token

Enter (map ) a token that will be sent in X-Auth-Token header to authenticate the requests made to the endpoint.

Reply to

Select or map the email that will be used as the reply-to address.

Flags

Select the message flags:

  • Openrate

  • Clicktrack

  • Google Analytics

Name

Enter (map) a name for the newsletter. Note that it must be between 2 and 128 characters long.

Type

Select the type of the newsletter:

  • Broadcast

  • Draft

Editor

Select the editor for the newsletter:

  • Custom

  • Text

  • GetResponse

  • Legacy

  • HTML 2

Note

This describes how the content of the message was created.

Send a Newsletter

Sends a newsletter draft.

Connection

Establish a connection to your GetResponse account.

Newsletter ID

Select the Newsletter ID of a newsletter that you want to send.

Send Settings

Select or map the send settings:

Note

Select how to deliver the message to the subscriber. You can specify multiple parameters, the system uses AND logic.

Selected Campaigns

Select or map the campaigns to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments or selectedContacts is required.

Selected Segments

Select or map the segments to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments or selectedContacts is required.

Selected Contacts

Select or map the contacts to send the newsletter.

Note

At least one of selectedCampaigns, selectedSegments or selectedContacts is required.

Selected Suppressions

Select or map the list of selected suppressions. Note that suppressions exclude contacts.

Excluded Campaigns

Select or map the campaigns to be excluded from sending the newsletter.

Excluded Segments

Select or map the segments to be excluded from sending the newsletter.

Time Travel

Select whether to use the time travel functionality.

Note

The system will match the scheduled sending hour for the message to the time zone of each recipient. As a result, sending may take up to 24 hours.

Perfect Timing

Select whether to use the perfect timing functionality.

External Lexpad

Enter (map) the external lexpad details:

Data Source URL

Enter ( map) a URL to the endpoint that will provide data for External Lexpad.

Data Source Token

Enter (map ) a token that will be sent in X-Auth-Token header to authenticate the requests made to the endpoint.

Send on

Enter (map) the scheduled send date for the message in the ISO 8601 format. See the list of supported date and time formats.

Cancel a Newsletter Sending

Cancels the sending of the newsletter and turns the newsletter into a draft.

Connection

Establish a connection to your GetResponse account.

Newsletter ID

Select or map a Newsletter ID of a newsletter whose you want to change to draft.

Delete a Newsletter

Deletes a specified newsletter.

Connection

Establish a connection to your GetResponse account.

Newsletter ID

Select or map a Newsletter ID of a newsletter to delete.

Contacts

With the contacts module you can watch, list, retrieve, create, update and delete the contacts.

Watch Contacts

Triggers when a new contact has been created.

Connection

Establish a connection to your GetResponse account.

Limit

Set the maximum number of contacts Make will return during one execution cycle. The default value is 2.

List Contacts

Lists all contacts or searches for them by specified criteria.

Connection

Establish a connection to your GetResponse account.

Email

Enter (map) the contact's email address whom you want to search.

Name

Enter (map) the name of the contact you want to search for.

Campaign ID

Select or map a Campaign ID of a campaign whose contacts you want to list.

Origin

Select or map an origin to search the contacts.

Created on (from)

Enter (map) a date to count data from this date. See the list of supported date and time formats.

Created on (to)

Enter (map) a date to count data to this date. See the list of supported date and time formats.

Changed on (from)

Enter (map) a date to search contacts edited from this date. See the list of supported date and time formats.

Changed on (to)

Enter (map) a date to search contacts edited to this date. See the list of supported date and time formats.

Sort by Names

Select the order of sorting by names:

Sort by Email

Select the order of sorting by Email address:

Sort by Creation Date

Select the order of sorting by date created

Sort by Updating Date

Select the order of sorting by date updated:

Sort by Campaign ID

Select the order of sorting by Campaign ID:

Limit

Set the maximum number of contacts Make will return during one execution cycle. The default value is 10.

Get a Contact

Returns a specified contact.

Connection

Establish a connection to your GetResponse account.

Contact ID

Select or map the Contact ID of the contact whose details you want to retrieve.

Create a Contact

Creates a new contact.

Connection

Establish a connection to your GetResponse account.

Campaign

Select or map the Campaign ID of a campaign for which you want to create the contact.

Scoring

Contact scoring, pass null to remove the score from a contact.

IP Address

Enter (map) the contact's IP address. The formats accepted are IPv4 and IPv6.

Update a Contact

Updates a specified contact.

Connection

Establish a connection to your GetResponse account.

Contact ID

Select or map a Contact ID whose details you want to update.

Campaign

Select or map the Campaign ID whose contact details you want to update.

Email

Enter (map) the contact's email address.

Name

Enter (map) an updated name for the contact.

Delete a Contact

Deletes a specified contact.

Connection

Establish a connection to your GetResponse account.

Contact ID

Select or map the Contact ID you want to delete.

IP Address

Enter (map) an IP address to make it possible to pass the IP from which the contact unsubscribed.

Note

Used only if the messageId was sent.

Campaigns

With the campaigns module you can watch, list, retrieve, create, and update the campaigns.

Watch Campaigns

Triggers when a new campaign has been created.

Connection

Establish a connection to your GetResponse account.

Limit

Set the maximum number of campaigns Make will return during one execution cycle. The default value is 2.

List Campaigns

Lists all campaigns or searches for them by specified criteria.

Connection

Establish a connection to your GetResponse account.

Name

Enter (map) the name of the campaign you want to search for.

Sort by Names

Select the order of sorting by names. For example, Ascending Order.

Is Default

Select whether this is a default campaign.

Sort by Date

Select the order of sorting by creation date. For example, Ascending order.

Limit

Set the maximum number of campaigns Make will return during one execution cycle. The default value is 10.

Get a Campaign

Returns a specified campaign.

Connection

Establish a connection to your GetResponse account.

Campaign ID

Select or map a Campaign ID whose details you want to retrieve.

Create a Campaign

Updates a new campaign.

Connection

Establish a connection to your GetResponse account.

Name

Enter (map) a name for the campaign.

For the field descriptions, see the Campaigns API reference.

Update a Campaign

Updates a specified campaign.

Connection

Establish a connection to your GetResponse account.

Campaign ID

Select or map a Campaign ID whose details you want to update.

For the field descriptions, see the Campaign API reference.

Tags

With the tags module you can List, retrieve, create, update and delete the tags.

List Tags

Lists all tags or searches for them by specified criteria.

Connection

Establish a connection to your GetResponse account.

Name

Enter (map) the name of the tag you want to search.

From

Enter (map) a date to search the tags created from this date. See the list of supported date and time formats.

To

Enter (map) a date to search the tags created to this date. See the list of supported date and time formats.

Sort

Select the order to sort the tags by created date:

  • Ascending

  • Descending

Limit

Set the maximum number of tags Make should return during one execution cycle. The default value is 10.

Get a Tag

Retrieves a specified tag.

Connection

Establish a connection to your GetResponse account.

Tag ID

Enter (map) the Tag ID of a tag whose details you want to retrieve.

Create a Tag

Creates a new tag.

Connection

Establish a connection to your GetResponse account.

Name

Enter (map) the tag name. Note that the name must be between 2 and 255 characters long.

Update a Tag

Updates a specified tag.

Connection

Establish a connection to your GetResponse account.

Tag ID

Enter (map) the Tag ID of a tag whose details you want to update.

Name

Enter (map) a new name for the tag.

Delete a Tag

Deletes a specified tag.

Connection

Establish a connection to your GetResponse account.

Tag ID

Enter (map) the Tag ID of a tag to delete.

Other

Make an API Call

Performs an arbitrary authorized API call.

Connection

Establish a connection to your GetResponse account.

URL

Enter a path relative to https://api.getresponse.com. For example, /v3/accounts

Note

For the list of available endpoints, refer to the GetResponse API documentation.

Method

GET

to retrieve information for an entry.

POST

to create a new entry.

PUT

to update/replace an existing entry.

PATCH

to make a partial entry update.

DELETE

to delete an entry.

Headers

Enter the desired request headers. You don't have to add authorization headers; we already did that for you.

Query String

Enter the request query string.

Body

Enter the body content for your API call.

Example of Use - List Contacts

The following API call will list all the contacts from your GetResponse account:

URL:

/v3/contacts

Method:

GET

GetResponse_5.png

Matches of the search can be found in the module's Output under Bundles > Body. In our example, 7 contacts were returned:

GetResponse_4.png
In this section: